Gateway E-1200, User Manual

Page: 26 / 42

Maintaining and Cleaning Your System 17
Installing LANDesk Client Manager
Intel’s LANDesk Client Manager is the Desktop Management Interface
(DMI) solution that is already loaded on your system. LANDesk Client
Manager lets you monitor your system for critical situations that may need
your attention. It also lets your system administrator remotely inventory and
manage systems on your network.
1.
In the C:\DMI folder, double-click the Setup icon to launch the
InstallShield
®
wizard.
2.
Follow the instructions that appear on your screen. If you are prompted
for a password during the installation process, enter
LOWTCO
.
LANDesk Client Manager comes with complete electronic documentation
and online help. Refer to these documents and Help for any LANDesk
concerns.
Advanced Power Management (APM)
The Windows 95 and Windows 98 operating systems (together with a
supporting system board and BIOS capabilities) provide many power
saving options. You can set when you want to have the hard drive spin
down, if the monitor should go into a lowered power state, and other
options.
Consult your Windows Help or operating system documentation for more
information about using power management.
Using Suspend Mode
Suspend, available in Windows 95, is a power management feature that lets
you leave your computer on in a power-saving mode. When your computer
is in Suspend, it appears to be off. However, it continues to receive incoming
faxes and perform automatic tasks you have scheduled. When you exit
Suspend, the computer returns to the state it was in without going through
the normal startup routine.
To install LANDesk Client Manager
Important!
If your system is part of a
Microsoft network, putting
your computer in sleep
mode does not disconnect
you from your network
connection.