background image

Replacing the AC Adapter

Technical Support

See the label on the bottom of the notebook for Customer Care Information. See 
your 

Reference Guide 

for important safety, regulatory, and legal information.

© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks 
or registered trademarks of Gateway, Inc. in the United States and other countries. 
All other brands and product names are trademarks or registered trademarks of 
their respective companies.

Replacing the AC Adapter

  To connect the AC adapter:

1

Connect the power cord to the AC adapter.

2

Connect the AC adapter to your convertible notebook’s power 
connector.

3

Plug the power cord into an AC power outlet. The battery charge 
indicator turns on.

If the battery charge indicator does not turn on:

Unplug the adapter from your convertible notebook, then 
plug it back in.

Press 

F

N

+F1

 to toggle the status lights on and off.

Make sure the power cord is firmly attached to the AC 
adapter.

Plug the power cord into a different wall outlet.

Important

The color of your convertible notebook may vary from the pictures 

in these instructions.

Caution

Replace the power cord if it becomes damaged. The replacement cord 

must be of the same type and voltage rating as the original cord or your 
convertible notebook may be damaged.

Warning

Do not attempt to disassemble the AC adapter. The AC adapter has 

no user-replaceable or user-serviceable parts inside. The AC adapter has 
dangerous voltages that can cause serious injury or death. Contact Gateway 
about returning defective AC adapters.

Important

If the battery charge indicator does not turn blue after three hours, 

contact Gateway Customer Care at the Web address or telephone number 
shown on the label on the bottom of your convertible notebook.

Battery charge indicator

1

Summary of Contents for C-140S











Reviews: