BIOS Setup 75
14.
Enter BIOS Setup by pressing
F
1
when prompted during startup. Once
in BIOS Setup, press
F5
and then re-enter the values you wrote down
at the beginning of this process.
If you do not set the CMOS values back to defaults using the
F
5
key or
the correct values from your earlier configuration, the system may
function erratically.
You may encounter a CMOS checksum error or other problem after the
system restarts. If so, try turning the system off and then restarting. CMOS
checksum errors require that you enter BIOS Setup, check your settings,
save your settings, and exit setup.
4079tl.book Page 75 Tuesday, December 22, 1998 2:04 PM
