Rear Panel 15
I/O Ports
Power Supplies (2)
The system is equipped with two 400-Watt (AC or DC) redundant power
supply modules.
Voltage Selector Switches (2 - AC Only)
Located on the back of each power supply module, these switches must be
set to the proper AC line voltage used in your locality (115VAC or
230VAC).
Power-In Connectors (2)
These are connectors into the power supplies which provide the electrical
current to the system and its peripherals. Using the power cables supplied
with the system, connect each of the power supplies to an appropriate power
source.
Port
Definition
Serial Ports 1
and 2
These are high speed serial ports which use the First-In-First-
Out (FIFO) protocol. If you have a serial mouse, connect it to
Serial Port 1 (COM1). Other serial devices such as serial
printers or modems can also be connected these ports.
Parallel Port
Parallel devices such as parallel printers and scanners can be
connected to this port.
Mouse Port
This port supports any mouse with a minature circular DIN
(mini-DIN) connector.
Keyboard Port This port supports any keyboard with a minature circular DIN
(mini-DIN) connector.
Video Port
Connects your monitor to the video interface card.
Dual USB
Ports
Provide connection points for USB-compliant peripheral
devices, such as modems, keyboards, joysticks, etc.
Ethernet Port
(optional)
Allows the system to be connected to a network with 10Base
T cable.
Note:
If your mouse has a mini-
DIN connector, you must
connect it to the Mouse
Port.
3430.book Page 15 Thursday, July 9, 1998 4:55 PM
Summary of Contents for ALR 8000
Page 12: ...xii Gateway ALR 8000 User s Guide 3430 book Page xii Thursday July 9 1998 4 55 PM...
Page 16: ...xvi Gateway ALR 8000 User s Guide 3430 book Page xvi Thursday July 9 1998 4 55 PM...
Page 24: ...8 Gateway ALR 8000 User s Guide 3430 book Page 8 Thursday July 9 1998 4 55 PM...
Page 27: ...Front Panel 11 Front Panel Figure 2 Front Panel 3430 book Page 11 Thursday July 9 1998 4 55 PM...