Gateway ALR 7200, User Manual

Page: 25 / 52

System Features 15
Power supply connectors
The system supports one 300-Watt power supply.
Voltage selector switch
Located on the back of the power supply module, this switch must be set to
the proper AC line voltage used in your locality (115VAC or 230VAC).
AC-in connector
This is a connector on the power supply which provides the electrical
current to the system and its peripherals. Using the power cable supplied
with the system, connect the power supply to a grounded wall outlet.
Expansion slot cover plates
These are cover plates over each of the expansion slots on the system board.
The system board has five PCI slots, one shared PCI/ISAslot, and one
PCI/RAIDport slot.
4076.book Page 15 Wednesday, January 6, 1999 3:48 PM