Gateway 8450R Documentation Update Download Page 2

Page: 2 / 4

Remove the two screws that secure the fan tray, then lift
the tray out of the chassis and place it on a static-free
surface.

Disconnect all cables attached to the power supply. Note
their locations and orientations so you can reconnect
them later.

Fan tray

8506762.fm Page 2 Thursday, August 10, 2000 1:32 PM

Summary of Contents for 8450R

Page 1: ...isconnect the power cord and all peripherals 2 Remove the bezel and both top panels following the instructions in the system manual 3 Remove the four screws that secure the upper drive bay bracket in...

Page 2: ...lift the tray out of the chassis and place it on a static free surface 6 Disconnect all cables attached to the power supply Note their locations and orientations so you can reconnect them later Fan t...

Page 3: ...chassis 9 Holding the new power supply with the back slightly elevated place the new power supply over the tab on the bottom of the chassis then rotate it so that it rests flat on the bottom of the ch...

Page 4: ...upper drive bay bracket on the top of the chassis Make sure the tabs on the bottom of the bracket fit into the slots at either side of the chassis 15 Slide the upper drive bay bracket back to set the...