Gateway 7400, System Manual

Page: 31 / 156

Opening the case
23
Opening the case
The only components that are accessible from outside of the chassis are the
front panel indicator lights. To access any of the removable media drives, the
hot-plug drives, or the power and reset switches you must open the bezel door.
To work on the internal components of the server, you must open the chassis,
which has two removable parts:
■
A bezel that covers the front of the chassis
■
A side cover panel that permits access to the interior of the case
Because the components inside the server are extremely sensitive to static
electricity, make sure to follow the precautions at the beginning of this chapter
for avoiding static electricity damage.
Only qualified personnel should open the system for maintenance. If you are
qualified to maintain the system yourself, make sure you are properly
grounded before opening the system chassis.
Important All references to front, back, left, or right on the server are
based on the server being in a normal, upright position,
as viewed from the front.
Warning Avoid exposure to dangerous electrical voltages and
moving parts by turning off your server and unplugging the
power cord and modem cord (if installed) before removing
the side cover panel.
8508366.book Page 23 Tuesday, October 23, 2001 11:29 AM