GatesAir Intraplex MA-311, Installation & Operation Manual

Page: 25 / 37

2 – Functional Description & Setup Intraplex VF-40 Voice Module
Version 1.11
GatesAir 2-15
Intraplex Products
Table 2-7. Transmit Channel Suggested P Codes to Achieve Desired dB Gain
Gain P Code Gain P Code
+ 6.0 dB 240 - 0.5 dB 120
+ 5.5 dB 229 -1.0 dB 114
+ 5.0 dB 217 -1.5 dB 105
+ 4.5 dB 208 -2.0 dB 100
+ 4.0 dB 197 -2.5 dB 93
+ 3.5 dB 188 - 3.0 dB 88
+ 3.0 dB 177 - 3.5 dB 82
+ 2.5 dB 170 - 4.0 dB 78
+ 2.0 dB 160 -4.5 dB 72
+ 1.5 dB 152 - 5.0 dB 68
+ 1.0 dB 145 -5.5 dB 64
+ 0.5 dB 136 -6.0 dB 60
+ 0.0 dB 128* MUTE 0
* The factory P Code setting is 128.
Table 2-8. Receive Channel Suggested P Codes to Achieve Desired dB Gain
Gain P Code Gain P Code
+ 6.0 dB 255 - 0.5 dB 120
+ 5.5 dB 242 -1.0 dB 114
+ 5.0 dB 223 -1.5 dB 107
+ 4.5 dB 215 -2.0 dB 100
+ 4.0 dB 205 -2.5 dB 95
+ 3.5 dB 192 - 3.0 dB 90
+ 3.0 dB 181 - 3.5 dB 85
+ 2.5 dB 171 - 4.0 dB 80
+ 2.0 dB 162 -4.5 dB 75
+ 1.5 dB 152 - 5.0 dB 70
+ 1.0 dB 145 -5.5 dB 67
+ 0.5 dB 136 -6.0 dB 63
+ 0.0 dB 128* MUTE 0
* The factory P Code setting is 128.
2.7.2 S Codes
S codes appear in response to a
STATUS?
query. Like the “P” codes, they are eight-digit binary
numbers. There is one S code for the VF-40 module, S1.
A typical VF-40 response to a STATUS? query looks like this:
* OK
CHANNEL CARD 4, TYPE 142
S01 = 0 (B00000000);