background image

Introducing the CX700 / CX560 

Page 4 

 

1: 

Introducing the CX700 / CX560 

Congratulations on owning a new Gates product: the CX700 / CX560 housing.  You’ve 
selected a product that will provide years of value and reliable service. We designed the 
CX700 / CX560 housing specifically for the Sony HDR-CX700V and HDR-CX560V 
digital video cameras.  

Please read through this entire guide to learn about the housing so you can get the most 
out of this imaging tool. In this section, we’ll introduce you to the features of the CX700 / 
CX560 so you can get started. 

Please note that the CX700 housing is only designed to work with the HDR-CX700V 
camera and the CX560 housing will only work with the HDR-CX560V camera. The 
housings are not interchangeable between cameras. 

Features 

The CX700 / CX560 have several key features: 

 

Small and Travel-friendly.  

At just a few pounds the CX700 / CX560 packs easily 

into your luggage or dive gear. 

 

 

‘Bulletproof’ construction.  

Gates legendary reliability is inherent in the CX700 / 

CX560:  machined aluminum shell, stainless hardware and reliable mechanical 
controls. 

   

 

Precision optics.  

The CX700 / CX560 allows the use of a variety of ports including 

Wide and Macro.

 

Warranty Disclaimer 

The CX700 / CX560

 

is a tool that, like any tool, requires knowledge and understanding 

to be effective.   

Your responsibility is to learn the proper setup, use and care of the CX700 / CX560.  
Because we can only provide you with the information necessary to do so, Gates does 
not warrant the contents of your housing (e.g. your camera and lenses) under any 
circumstance.  For the same reasons, Gates does not warrant optical performance or 
image quality.   

We warrant the CX700 / CX560

 

as an image acquisition tool for a period of 2 years.  The 

optional Seal Check unit is warranted for 1 year.  Optics are warranted for a period of 1 
year or 100 hours water contact, whichever comes first.   

If you have any questions about the setup, use and care of the CX700 / CX560, contact 
Gates directly.  Details are in section 5.   

Summary of Contents for CX560


























Reviews: