The CX760 / PJ760 Setup
Page 9
Installing the Camera into the Housing
Carefully slide camera on its camera mount
into the front housing half. The
camera mount will mate and slide into the mating mount on the housing.
Observe
that the camera mates into the alignment collar at the front of the shell,
just behind the port opening.
Secure the camera
by rotating the lock clockwise until snug.
Press in controls.
When the camera is installed into the front housing half, press
in the Manual Button and Manual Dial controls to mate with the camera.
Check controls.
At this point it’s a good idea to check all controls on the front shell
for proper operation. (See section 4 for controls mentioned here.)
Open the LCD fully.
Slide camera into housing until fully forward.
Open the LCD fully.
Secure by rotating the lock
clockwise.
