GATEQ ENAV-6520i, User Manual

Page: 16 / 19

Chapter VIII. Installation Direction
Warning! ：
Other notices:
8.1 Main machine installation
Please read the safety notices specified in the Chapter II carefully before
installing the machine. Our company suggests you to invite professional
personnel to install the machine. The installation made by the personnel
without training may cause accident.
Do not install the machine on the place of high temperature or is
moisture, such as:
Close to heater, vent, or air condition;
Place that sunshine shines directly, such as panel
Place that rain may splashes, such as close to vehicle door.
Please install the machine on the place that is of enough tension, or else
the system may out of operation.
Level installation angle of the machine shall not exceed 20°, and the left-
Right angle shall be not over 5°, the diagram is:
Cables shall not be pilled behind fan when installing, so as to prevent
hiding thermovent and effecting thermolysis effect.
You can install the machine according to the following diagram:
Chapter VII. Technical Specification