Swing Gate Opener Manual
Warnings
Please read this instruction manual carefully before the installation of gate operator system.
A wired photo eye sensor must be installed for this gate operator to function properly
(UL325-2016)
This manual is exclusively for qualified installation personnel. We are not responsible for
improper installation and failure to comply with local electrical and building regulations.
* Be aware of the hazards that may exist in the procedures of installation and operation of
the gate-automated system. Besides, the installation must be carried out in conformity with
local standards and regulations.
* If the system is correctly installed and used following all the standards and regulations, it
will ensure a high degree of safety.
* Make sure that the gates work properly before installing the gate-automated system and
confirm the gates are appropriate for the application.
* Do not let children operate or play with the gate-automated system.
* Do not cross the path of the gate-automated system when operating
* Please keep all the control devices and any other pulse generator away from children to
avoid the gate-automated system being activated accidentally.
* Do not make any modifications to any components that is not in this manual.
* Do not try to manually open or close the gate before you release the gear motor.
* If there is a failure that cannot be solved and is not mentioned in this manual, please
contact qualified installation personnel.
* Do not use the gate-automated system before all the procedures and instructions have been
carried out and thoroughly read.
* Test the gate-automated system weekly and have qualified installation personnel to check
and maintain the system at least every 6 months.
* Install warning signs on the both sides of the gate to warn the people in the area of
potential hazards.
Technical Characteristics
Motor: 24VDC motor with mechanical release
Gear type: Worm gear
Max absorbed power: 144W
Peak thrust: 3500N
Nominal thrust: 3000N
Stroke length: 300mm
Power supply: 110VAC converted to 24VDC with
built in transformer
Nominal input power: 2A
Maximum operating current: 5.5A for maximum 10
seconds
Maximum gate weight: 500 lbs. per leaf
Maximum gate length: 14 ft.
Duty cycle: 20%
