401/404
VCR Retrofit to N401
Protecting Your
Precious Cargo
© Gatekeeper Systems Inc
Specifications subject to change without notice.
PDN1102 Jun 9, 2010
V2.0
#301 31127 WHEEL AVENUE
ABBOTSFORD. B.C. V2T 6H1
TOLL FREE: 1.888.666.4833
TEL: 1.604.864.6187
FAX: 1.604.864.8490
gatekeeper-systems.com
Installation Guide
a) Disconnect the VCR power cable (16 AWG white wire & black wire) from the battery. Cut the cable to remove the VRS
TM
Box Assembly from the VCR power cable. Insert a piece of 2.5 inches length 1/4” heat shrink to one end of the cable. Strip 1/4”
(6mm) of the wire insulation from the end of each wire. Reconnect the “Live” wires (white) and the “Ground” wires (black) by crimping
the Butt Connectors (not provided) with proper crimping tool. Protect the connections by heating up the heat shrink.
b) Connect the provided 2 Ampere Fuse Assembly to the “Live” wire of the VCR power cable. Then reconnect the power cable to the
battery.
(B) On existing Gatekeeper VCR power harness, proceed with the following instructions :
