Manual instruction Bure
Handle adjustment
The handle is adjusted to required by loosing the knob,
adjust the handle, tighten the knob.
Up
Down
Min
Max
Raising/Lowering
the frame (Electric)
Required height is adjusted by
the hand control. Arrow <up>
and <down>
Widening the frame
(only Bure Double)
Required widening (max/min)
is adjusted by the hand control;
hold the left side-min, widening
of the frame. Hold the right side
= max. widening of the frame.
Adjusting the armrest platforms (right/left)
For an optimal support the platforms can be width adjusted.
Loose the knob and adjust the height. Adjust the knob.
Locking the wheel
The wheels are locked when activating the foot brake.
.
Unlocking the wheel
To release the brake- restore.
1. Socket for battery
2. Socket for plug
(Note! The fuse MUST always be connected to
the motor for a valid IP classification)
3. Socket for handcontroll
4. Socket for motor- high/low
5. Socket for motor- widening
Note! Make sure that the sockets are connected to the correct plug as it
otherwise can damage the motor.
Charging must be done when the table isn’t used.
(The battery can never be overcharged). You charge
by connecting the plug to an electrical socket.
Please charge the battery for 24 hours
before the first usage.
Wiring diagram
(Bure El/Bure Double/Bure Extra)
Battery charging
(Bure El/Bure Double/Bure Extra)
2
3
4
1
5
