Gate 361818110, Quick Start Manual

Page: 23 / 78

23 /76
LED WHAT HAPPENED WHAT TO DO
Self-test failed, Bluetooth® connection is
not possible
• Disconnect the power supply from Blu-Link, wait 10
seconds and reconnect the power supply
• If you have a USB-Link, connect it to the INPUT
Blu-Link connector, go to Diagnostics in GCS, check
Blu-Link DTCs and follow the instructions there
• Contact us at: support@gatee.eu
BLINKING
• No Blu-Link firmware installed
• Self-test failed, Bluetooth® connection
is possible
• Install Blu-Link firmware via GCS
• Connect Blu-Link to GCS, go to Diagnostics in GCS,
check Blu-Link DTCs and follow the instructions there
for120 s
Blu-Link is connected correctly via
Blutooth®
Enjoy using Blu-Link
Blu-Link firmware update in progress
• Wait until the firmware has been updated
• Keep the device with GCS as close as possible to
Blu-Link