IF NEEDED, REVERSE LEVERS
Determine handing of your door
Stand on exterior side and face the door.
A. Your door is a left hand door if hinges are installed on the left side.
B. Your door is a right hand door if hinges are installed on the right side.
FOLLOW THE PROCEDURE BELOW FOR CHANGING LEVER HANDING:
The leverset is preset as a right hand lever. If your door is a right hand door, you can install it now. If your door is left hand door, you
can change the lever handing by following the procedure below:
1. Use allen wrench to loosen set screw attached to the lever.
2. Remove lever and install the lever of opposite handing.
3. Make sure to align set screw hole with the correspondng hole on the spindle.
4. Insert set screw and tighten with allen wrench to secure the assembly.
* Make sure that the handle portion of the lever extends toward the hinges of the door.
LIFETIME WARRANTY
The Manufacturer extends a Full Lifetime Mechanical and Finish Warranty to the original “User” of this Product against defects in materials
and workmanship as long as the User occupies the residential premises upon which the Product was originally installed.
Upon return of a defective Product to the Manufacturer, the Manufacturer shall either replace, repair or refund the purchase price in
exchange for the Product.
This warranty does not cover abused or misused Products or those Products used in commercial applications.
No other warranties, express or implied are made with respect to the Product including but not limited to any implied warranty of
merchantability or fitness for a particular purpose.
The Manufacturer DOES NOT authorize any person to create for it any obligation or liability in connection with the Product.
The Manufacturer maximum liability hereunder limited to the purchase price of the Product, in no event shall the company be liable for
any consequential, indirect, incidental or special damages of any nature arising from the sale or use of this Product, whether in contract,
tort, strict liability or otherwise.
( For warranty service, please call 1-877-4GATEHS, 8:30 a.m. - 5:30 p.m. EST, Monday through Friday )
Note:
Should the Product be considered a consumer product it may be covered by the Magnusson Moss Federal Warranty Act, please be
advised that: (1) Some states do not allow limitations or incidental consequential damages on how long an implied warranty lasts so that
the above limitations may not bully apply: and (2) This warranty gives specific legal rights and a User may have other rights which may
vary from state to state.
REPLACEMENT PARTS LIST & TROUBLESHOOTING
For replacement parts & troubleshooting, please call service department at
1-877-4GATEHS, 8:30 a.m. - 5:30 p.m. EST, Monday through Friday.
Part
Part #
Screw pack
SCR-L784
Tubular Latch
KLB710-AQA3PCD
INSTALLATION OF COMPLETE LEVER OR KNOB ASSEMBLY:
A. Install exterior lever or knob assembly, inserting square spindle with posts through latch.
B. Install the interior rose plate with the threaded hole of the connecting piece facing down. Push the rose plate against door face and
apply two mounting screws to tighten firmly.
C. Apply interior rose to cover the rose plate.
D. Apply interior knob or lever to engage with square spindle, pushing against interior rose and apply set screw to tighten to complete
assembly.
REMARKS :
A-1. Privacy lock ( Bed & Bath ) fits on doors requiring locking from inside such as bedroom and bathroom.
Press button ( push rod ) on the inside of the lock will lock the door. Locking will be automatically relieved by turning
inside knob or lever.
A-2. When the locking mechanism is engaged, you will need to insert a small pin or a pointed tool into the small hole
on the lower outside rose, and push it in to unlock the door.
B. Passage lock ( Hall & Closet ) fits on doors which do not require locking. Turning knob or lever on either side will
open the door.
1.4 in.(35.5mm)
0.2 in.(5mm)
0.76 in.(19mm)
Inside
Outside
Square spindle
Connecting piece
Tubular latch
Rosette
Short wood screw
Set screws
Knob/lever reinforcement plate
Allen wrench
Interior knob/lever
Mounting screws
Using allen wrench to firmly tighten set screws.
Inside
Outside
Outside
Locking relief tool
Outside emergency
unlocking access hole
A-2
Inside
Turning inside knob or
lever to relieve locking
Locking button
( push rod )
A-1
Locking
Unlocking
A.
Hinges
Left hand door
Right hand door
Hinges
Exterior
B.
Outside
Inside
Exterior lever and interior lever can be switched.
Spindle
Outside
Inside
Printed in Taiwan
