background image

01

!

SAFETY INFORMATION

1. Do not attempt to disassemble any internal components of this lockset as this WILL 

void the limited warranty.

2. Do not drop or hit/strike the lockset as excessive shock may result in permanent damage.

3. Do not use sharp objects to press key buttons.

4. It is strongly recommended that you always create a written backup of the programming 

code and individual user codes. Please use the last page of this booklet as your reference. 

5. For your security, please remember to change this lockset's factory default programming 

code to a PERSONAL programing  code prior to normal day-to-day use of this product.

6. It is strongly recommended that you use only ALKALINE BATTERIES to operate this 

product.

!

WARNING

1. To prevent damage to the finish, Do NOT use any abrasives, sharp objects or harsh

chemical products containing alcohol, petroleum solvents, acids or acetone to clean

this lockset.

2. Do not let any water or liquid into lockset during installation process.

CARE AND MAINTENANCE

The following care instructions should be followed to ensure a long-lasting finish:

1. Prior to painting your door, remove locks or do not install locks.

2. Periodically clean with mild soap and a soft cloth only.

Summary of Contents for G27D01














































































Reviews: