EN
8
4. The appliance is ready to use.
press the reset button until it clicks.
inside which is the reset button. Insert the stick into the hole and
3. Turn the appliance over. There is a small hole on the bottom,
cool to room temperature.
2. Empty the tank (if there is any water) and allow the appliance to
1. Unplug the power cord.
following:
appliance. To return to the usual operating mode, you must do the
water in the tank, safety thermostat will automatically turn off the
In case of a "dry" start up, i.e. without water or with insufficient
(WITH NO WATER IN THE TANK)
OPERATING MODE AFTER THE ‘DRY’ START UP
HOW TO RETURN THE APPLIANCE TO
coffee basket is not filled with ground coffee.
process described above (see the section Brewing coffee), but the
Getting boiling hot water for brewing hot drinks is the same as the
BOILING HOT WATER FOR BREWING HOT DRINKS
prepare the next portion of coffee.
tank, infuser, water pipe and lid. The appliance is ready to
infuser from the water tank. Pour out used coffee. Rinse the
switch and disconnect the plug from the outlet. Remove the
disconnect the appliance from the supply using the power
cups and the coffee is not visible in the measuring glass,
7. When the volume of coffee in the tank is reduced to about 3
indicator light comes on.
this case, the boiling indicator light goes off and the heating
appliance will automatically enter the mode of heating thedrink. In
process of brewing coffee will begin. When the coffee is ready,the
6. When the water temperature in the tank reaches 185°F, the
Turning on the appliance
