38
• Ensure to fasten the blade assembly securely and leak-free on the jar, before
assembling the jar to the motor base. The threads of the jar and blade assembly and
lids may not be over-tightened or tilted to avoid leakage and damage to the threads.
• Do not attempt to mount the blade assembly without the jar onto the motor base
to avoid severe injuries and damage.
• Due to vibration the appliance may move around on the table or counter during
operation. Do not leave the appliance unattended while connected to the power sup-
ply. Do not place the appliance near the edge of the table or counter.
TECHNICAL SPECIFICATIONS
Model:
Art.-No.: 41039 »Design Personal Blender Pro«
Power supply:
230 V AC, 50 Hz
Maximum power consumption: 1000 W
Length of power cord:
approx. 110 cm
Weight (motor base only):
approx. 2.32 kg
Dimensions (motor base only): approx. 15.2 cm x 15.2 cm x 17.6 cm (w x d x h)
Capacity:
large jar: 0.7 Litre, small jar: 0.5 Litre
Certification:
PROPERTIES OF YOUR NEW
»DESIGN PERSONAL BLENDER PRO«
Your new »Design Personal Blender Pro« can prepare delightful, healthy drinks.
However, it is suited for chopping hard food (e.g. nuts) or even crushing ice as well.
For this, your new »Design Personal Blender Pro« is agitating very sharp knives on
high speed. Conveniently, the blade assembly is twisted on top of the jar, and for
operation, the jar is mounted upside down on the motor base. The gasket seal in the
base of the blade assembly prevents leaking.
In most cases, the best results are achieved by agitating the appliance in pulses.
After operation, you simply unscrew the blade assembly. This makes emptying and
cleaning of the blades assembly and jar effortless.
Conveniently, you may use the jar for storing your food. For this, after operation
close the jar with one of the lids. The jars and lids are interchangeable to your like.
Due to the tightly sealable flap of the lid,, beverages can be poured without remo-
ving the lid.
