and carefully dry the power base and exterior of the kettle after cleaning. Do not handle the
appliance or any part of it with violence. The lid is easily opened by pressing the opening
button. Do not lift or carry the kettle by the lid. Always use the handle for moving the kettle.
• Do not immerse the kettle base, switch area, power base or power cord in water, or allow
moisture to come in contact with these parts. Never place the appliance or any part of it in
an automatic dishwasher.
• This appliance is for household use only and not intended for use in moving vehicles or
outdoors. Do not operate or store the appliance in humid or wet areas. During operation a
little amount of moisture could condensate on the power base. This is no indication for any
failure.
Potential risks due to hight temperatures
The exterior of the Design Kettle Pro will get very hot during operation. In addition, beware
of steam and hot condensate during operation and even some minutes after switching off the
appliance, especially when opening the lid or pouring out water. The kettle is still hot, even
some minutes after switching off. Do not touch hot surfaces (exterior of the water container
and lid) while the appliance is in use. Always use the handle for moving the kettle. Always
use the opening button for opening the lid.
Do not place the kettle on any heat-sensitive objects, while it is hot. Never place any heat-
sensitive objects in or on the kettle. Close supervision is important, when moving the kettle
immediately after switching off. Take care to hold the kettle level, especially when filled to
the maximum level.
• For operation place the appliance on a dry, stable, heat-resistant, water-resistant and
level surface (i.e. glass, ceramics, stone). Never place any clothes or other objects on or
under the appliance during operation to avoid overheating. Always let the kettle cool down
to room temperature before cleaning.
• Always keep your hands, face and arms as well as any clothing and other objects away
from the lid and spout during operation to avoid scalds and damage. Beware of steam and
hot condensate, when opening the lid. Always keep the lid closed, when operating the
kettle. Otherwise power consumption increases significantly and, additionally, the automatic
switching off of the heating elements will not work out. Ensure all persons stay in sufficient
distance to the appliance during operation.
WARNING!
Do not overfill the water container beyond the maximum water level mark
1700/MAX (1.7 litre). Otherwise boiling water could splash from the kettle during operati
-
on, causing injuries to persons and damage. Only use clear water without any ingredients.
Dry spilled water immediately.
WARNING!
Do not open the lid during and after operation. This may result in boiling
water splashing from the kettle. Pour all the hot water from the kettle before opening the lid
to refill.
Important safeguards for all electrical appliances
Care must be taken when using any electrical appliance. Please adhere to the following
precautions:
• Ensure that the voltage rating of your mains power supply corresponds to the voltage re
-
quirements of the appliance (230 - 240 V, 50 Hz, AC, rated for 16 A). Always connect the
18
Summary of Contents for Design Kettle Pro
Page 23: ...Notizen Notes ...
