Do not place any cloth or tissue beneath or on the appliance, to avoid any risk of fire, electric
shock and overheating. Always keep the table or counter clean and dry and immediately
wipe off spilled liquids. Do not place the appliance near the edge of the table or counter or on
inclined or wet surfaces or where it can fall.
• Do not place the appliance or any parts of it on or near hot surfaces (heater, gas burner,
grill or oven). Do not place the appliance on the power cord. If the power cord warms up du-
ring operation or is likely to be damaged, it must be replaced by an authorised service centre.
Do not attempt to repair the power cord!
important advice for the non-stick coating
The heating surface has a non-stick coating. If the coating is damaged, grazed or parts of it
detach from the heating surface do not use the appliance anymore.
• Do not use any cooking cutlery made of metal or similar hard material on the heating
surface to avoid damaging the coating. Only use cooking cutlery made of wood or heat in-
sensitive plastic. Never cut on or try to scrape off batter from the heating surface using hard,
sharp-edged items.
• Never use abrasive cleaners, cleaning pads or any hard and sharp objects (i.e. metal scou
-
ring pads) for cleaning. Clean the Design Crêpemaker Pro with a damped sponge or tissue
and carefully dry the exterior of the appliance after cleaning. Do not handle the appliance or
any part of it with violence. Never place the appliance in an automatic dishwasher.
• Never use non-stick spray as this may damages the non-stick coating of the appliance.
TeCHniCal speCifiCaTions
Model:
Art.-N. 44005 Design Crêpemaker Pro
Power supply:
230-240 V AC, 50/60 Hz
Maximum power consumption:
1.250 W
Length of power cord:
approx. 115 cm
Weight:
approx. 2.8 kg
Dimensions:
approx. 330 x 115 mm (Ø x height)
Certification:
28