14
15
6. If you wish to reheat bread slices that already cooled down, press the REHEAT
button within 10 seconds after starting the toasting process. The REHEAT button
illuminates and, repeatedly, all 9 LEDs are illuminated one after the other in a
subsequent sequence and go out. With the REHEAT function selected, you can-
not change the browning level.
7. If you wish to toast frozen bread slices, press the DEFROST button within 10
seconds after starting the toasting process. The DEFROST button will illuminate
and the LEDs indicating the browning level will flash. With this function, you may
additionally select the desired browning level via the browning dial.
During the toasting process, the LEDs will go out from the left to the right one after
the other. On completion of the toasting process, even the last LED will have gone
out and the toasting lever will jump back to the upper idle position, automatically
ejecting the bread slices.
Tip:
For your convenience you may lift up the toasting lever somewhat above the
idle position to take out your bread slices.
WARMING BUNS
Important:
Never put the food to be heated up directly on top of the bread slots of
the toaster. Do not put any runny or dripping food on or in the toaster to avoid dama-
ge due to overheating, electric shock and fire. Do not heat up 2 items at a time.
1. Pull the crumb tray out of the appliance and empty the crumb tray. Thereafter
replace the crumb tray.
2. If you wish to heat up food that is too big for being heated in the bread slots
(e.g. buns, croissants, small cakes), first push down the bun warmer lever to the
stop to fold out the bun warmer.
3. For each toasting process, place only one piece of food onto the bun warmer.
Ensure that your food will not fall down or fall into the toaster.
4. Switch on the appliance by pressing down the toasting lever and, within 10
seconds, select the desired browning level by turning the browning dial until the
appropriate number of LEDs is illuminated.
The toasting process is complete as soon as all LEDs of the LED display have gone
out and the toasting lever jumps back to the upper idle position. If you do not wish
to use the bun warmer again, fold the bun warmer back into the housing by pulling
the bun warmer lever upwards.
CARE AND CLEANING
WARNING:
Always switch OFF the appliance (press the CANCEL button),
then unplug the appliance, and wait until the appliance cooled down (at least 30
minutes), before moving or cleaning the appliance. Ensure not to drip any liquids
into the appliance during cleaning.
Do not turn the appliance upside down. Do not shake the appliance.
Do not poke
in the bread slots to avoid damage to the heating elements and mechanism.
Do not use any abrasive cleaners or corrosive chemicals (e.g. bleach) for cleaning
the appliance or any parts of it, to avoid damage to the surfaces. Do not use any
hard or sharp-edged objects for cleaning any surface of the appliance. Do not
immerse the housing or the power cord in water or any other liquid. Do not spill or
drip any liquids on or in these parts to avoid risk of fire and electric shock.
Do not
clean the housing or power cord in an automatic dishwasher.
Do not use violence!
1. Pull out the crumb tray and empty the crumb tray. Remove any remaining resi-
dues with a soft damp cloth. Then wipe dry.
2. Clean the exterior of the appliance using a soft cloth slightly moistened with a
little dishwater. Thereafter wipe dry thoroughly.
3. Wipe the power cord using a clean moistened cloth.
4. If you have used the bun warmer, fold out the bun warmer by pressing the bun
warmer lever down. Carefully wipe the wires of the bun warmer with a soft
damp cloth to remove any crumbs sticking to the wires. However, ensure not to
damage the wires of the bun warmer when doing so.
5. Leave the appliance dry naturally for approx. 1/2 hour where it is
out of reach
of young children
.
6. Pull the bun warmer lever upwards to lower the bun warmer back into the hou-
sing. Re-insert the crumb tray.
STORAGE
WARNING:
Young children must be supervised that they do not play with the
appliance or any part of it. When the appliance is not in use, always switch OFF
(press the CANCEL button). Thereafter, unplug the appliance. Do not leave the
appliance unattended while connected to the power supply to avoid risk of electric
shock or fire. Always clean the appliance and all its parts before storing to avoid
accumulation of baked-on food (see: ‘Care and Cleaning’).
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight
and inadmissible strain (mechanical or electric shock, heat, moisture) and where it is
