background image

and that you can not knock the appliance over during operation to avoid personal injury.

• Do not use the appliance on metal surface, for example, a sink drain board.

Do not 

lift, pull or carry the appliance by the power cord. To move or operate

the appliance, always grasp the motor housing and ensure the appliance is turned off.

• The appliance has a circuit breaker. If the grinding bowl and the lid are not in
proper position you can not turn the appliance on. 

• Do not operate this appliance for longer than 1 minute at a time as this could
cause overheating. Allow to cool for a few minutes after each use. Allow appliance to
cool down for 10-15 minutes after extended continuous operation.

• Never leave the appliance unattended when the plug is connected to the power
outlet. Always 

IMMEDIATELY 

unplug the appliance and wait for the motor to stop

completely, if the appliance is not in use (even for a short break) and before assembling
/disassembling or cleaning.

Do not 

immerse the motor housing or power cord in water or any other liquid.

Do not 

pour or drip any liquids on the motor housing or power cord. When liquids

are spilled on the motor housing, immediately unplug the appliance and dry the
motor housing to avoid risk of electric shock or fire. 

Do not

attempt to operate the

appliance, when liquids are on or in the motor housing. 

Do not 

place the motor housing in an automatic dishwasher!

• To avoid damage, 

do not

use any abrasive cleaners, corrosive chemicals

(i.e. disinfectants, bleach) or cleaning pads for operation or cleaning. 

Do not 

use

any hard or sharp utensils for operation or cleaning. Always handle the entire
appliance and all parts of it with care and without violence. 

Do not

use the appliance if  it is damaged or units of the appliance are damaged.

Do not

use the appliance if it does not function properly or if it was excessively

loaded. The appliance is likely damaged if the appliance or units of the appliance
show cracks, exorbitant wearing down, alterations or leaks. It is also likely damaged if the
grinding gear of the motor housing moves slowly. Take the appliance for technical
maintenance and repair to an authorised specialised reparation shop.

WARNING: 

Do not overfill the grinding bowl to avoid overheating.

Do not

grind food that is sticky or extremely hard i. e. chocolate, cheese, whole

nutmeg, candied fruits, etc. to avoid that the motor stalls or stucks during operation. In
this case turn the appliance ´OFF` to avoid overheating.

• Keep the appliance clean. Follow cleaning instructions provided in this book.

17

42601_Kaffee_Manual.qxd  01.11.2007  12:20 Uhr  Seite 17

Summary of Contents for 42601














Reviews: