34
35
Eng
li
sh
Eng
lish
10 Maintenance
10.1 cleaning and care
If the appliance is dirty, proceed as follows:
1. Before beginning with repair or cleaning works make sure the
device has been disconnected from power socket (pull the power
plug!!!) and has cooled down.
2. Clean the interior (including the rear wall and bottom) with warm
water and a mild cleaning product. Do not use any aggressive
cleaning products!
3. Dry all surfaces carefully.
4. After cleaning reconnect the refrigerator to the mains supply.
5. Never clean the appliance with steam cleaning equipment.
6. Regularly clean the refrigerator and aslo check the condensation
water outflow hole.
11 Repairs
!
WARnInG:
Repairs to electrical appliances
may only be carried out by an expert qualified
to do so. A repair carried out incorrectly or
unprofessionally puts the user at risk and leads to
the warranty becoming invalid!
WARnInG:
Do not damage the refrigerant circuit.
WARnInG
:
Do not use electrical appliances inside
the food storage compartments of the appliance,
unless they are of the type recommended by the
manufacturer.
12 What to do if...
Solutions to problems
The design of the appliance warranty interruption-free operation and
a long working life. If nevertheless a fault does occur during operation,
check whether this can be traced back to an operating error.
Any subsequent faults can be eliminated by yourself by checking the
possible causes:
Fault
Possible causes
Measures
The appliance
is not cooling
Is the mains plug in the
socket?
Has the fuse in the
socket been triggered?
Insert the mains plug
correctly in the mains
socket, switch on the
fuse, if required call for
expert assistance.
The appliance
is noisy when
operating
Is the appliance
standing vertically or
horizontally?
Adjust the appliance
using the feet.
The flow noises in the
refrigerant circuit are
normal.
Water is
lying on the
bottom of the
refrigerator
Has the temperature
regulator been set
correctly?
Is the condensation
water channel blocked?
Correct the temperature
regulator setting. Clean
the outflow opening
with a pipe cleaner.
The appliance
is not cooling
correctly
Is the appliance
ventilation blocked?
Clear the ventilation
slot, position the
appliance freely.
