32
33
Eng
li
sh
Eng
lish
9 Defrosting / Switching off
During the cooling and defrosting phases a thin layer of ice or drops
of water form on the inner wall. The condensation water flows into
a collecting tray and evaporates. Please ensure that the outflow
channel is not blocked. It can be cleaned carefully with a pipe cleaner.
Your refrigerator does have automatic defrosting, but if a thicker
layer of ice forms in-side the appliance – if you occasionally defrost it
by hand – proceed as described under point 10.1. Optionally, in order
to accelerate defrosting you can place a bowl with hot water in the
appliance or use a hairdryer.
10 Maintenance
10.1 cleaning and care
If the appliance is dirty, proceed as follows:
1. Before beginning with repair or cleaning works make sure the
device has been disconnected from power socket (pull the power
plug!!!) and has cooled down.
2. Clean the interior (including the rear wall and bottom) with warm
water and a mild cleaning product. Do not use any aggressive
cleaning products!
3. Dry all surfaces carefully.
4. After cleaning reconnect the refrigerator to the mains supply.
5. Never clean the appliance with steam cleaning equipment.
6. Regularly clean the refrigerator and aslo check the condensation
water outflow hole.
7. If the light is damaged, it must be replaced with a same size, power
and shape one. and must be replaced by the manufacturer or its
service agent.
11 Repairs
!
WARnInG:
Repairs to electrical appliances
may only be carried out by an expert qualified
to do so. A repair carried out incorrectly or
unprofessionally puts the user at risk and leads to
the warranty becoming invalid!
WARnInG:
Do not damage the refrigerant circuit.
WARnInG
:
Do not use electrical appliances inside
the food storage compartments of the appliance,
unless they are of the type recommended by the
manufacturer.
