D-Guard² Instruction Manual
Item Number 201018
30
18.6 Sensor Gain
You can select a sensor type from the Sensor Presets menu, see
, the
sensor gain is automatically set.
You can adjust the sensor gain to compensate for differences between sensors of the
same type or to change the full scale value for a sensor.
Access the Sensor Settings Menu. See
.
Step 2
. Use to adjust then to apply.
Step 1
. Use to exit or to set suppression.
Step 4
. Use to go back or to continue.
Step 3
. Use to return to the settings menu.
Figure 17. Sensor gain warning
CAUTION: The sensor gain and the full scale value effect each other. If you try to set the
gain too high the D-Guard² will show you.