gassero ALUBOX X-treme Series, Installation And User Manual

Page: 36 / 48

6.5 MAIN FUNCTIONS
Button Action Procedure Display / Function
Actuate rotary knob left/right Comfort setpoint with blinking temperature
Turn rotary knob Confirm with OK button Blinking temperature in 0,5 °C steps from 10 to 30 °C
or wait 5 sec. Comfort setpoint saved
or press Comfort setpoint cancelled
- after 3 sec. Main menu appears
Set room temperature for Zone 2 independent from zone 1 Choose heating zone
zone 1 or zone 2 Actuate rotary knob left/right Heating zone is chosen
Confirm with OK button
Blinking temperature in 0,5 °C steps from 10 to 30 °C
Actuate rotary knob left/right
Confirm with OK button
or wait 5 sec. Comfort setpoint saved
or press Comfort setpoint cancelled
- after 3 sec. Main menu appears
Switch on /off DHW operation Press button
DHW mode on / off
(see indication below DHW symbol)
- On: DHW mode by time programm
- Off: no DHW operation
- Safety functions activated
Factory setting
Automatic mode on, with:
- Heating by time programm
- Temperature setpoint by heating programm
- Safety functions activated
- Summer/Winter automatic switching activated
- ECO-functions activated
(see indication below operation symbol)
Press button 1x
Continuous COMFORT heating on, with:
- Heating without time programm by comfort setpoint
- Safety functions activated
Press button 1x again
Continuous REDUCED heating on, with:
- Heating without time programm by reduced setpoint
- Safety functions activated
- Summer/Winter automatic switching activated
- ECO-functions activated
Press button 1x again Safety mode on, with:
- Heating off
- Temperature by frost protection
- Safety functions activated
Controller Stop Mode Press button > 3 sec.
304: Controller Stopp mode insert setpoint
Press button > 3 sec. again after 3 sec. Main menu appears
Press button 1x
INFO Segment displayed
Press button 1x again
- Status Boiler - room temperature
Press button 1x again
- room temperature minimum
…..
- Status DHW - room temperature maximum
- Status zone 1 - outside temperature
Info display - Status zone 2 - outside temperature minimum
Time / Date - DHW temperature 1
- Error indication - Boiler temperature
- Maintenance indication - Flow temperature
(Info display depends on configuration)
Press button 1x Back to main menu; INFO Segment disappears
Operation by manual
Press button 1x Manual mode on
(spanner symbol appears)
setpoint
- Haeting by fixed setpoint
Change factory setting Press button (factory setting = 60 °C)
boiler temperature Press button 301: Manual mode insert setpoint?
Turn rotary knob -/+ blinking temperature
Press button set value
Press button
Status boiler
Press button Manual mode off (spanner symbol disappears)
Deaeration Press button > 3 sec. 312: Deaeration on
Press button > 3 sec. again Deaeration off
Activate chimney sweeper Press button (< 3 sec.) Chimney sweeper mode on
mode Press button again (< 3 sec.) Chimney sweeper mode off
Temporary reduction of Press button Heating by reduced setpoint
reduced temperature on QAA75 Press button again Heating by comfort setpoint
Reset button Press button (< 3 sec.) Boiler manually blocked, no release
Press button again > 3 sec. Boiler released, Alarm symbol disappears
RESET
Change heating operation
mode
Zone 1 and zone 2
Set room temperature
35