Gaspardo PINTA 400, Use And Maintenance

Page: 49 / 176

USE AND MAINTENANCE
ENGLISH
g
49 cod. G19503090
3.3 REGULATIONS
3.3.1 DISTRIBUTOR (Fig. 13)
The volumetric distributing device, GRINTA, is essentially
composed of four elements for seeds distribution:
A) aluminium monobloc frame;
B) agitator element;
C) dosing rollers;
D) Feeler pin.
MONOBLOC FRAME
The monobloc frame is made of aluminium and offers the
following main advantages:
- realization of very high precision and high quality over time;
- resistance to the effects of UV rays or to the problems of harsh
autside temperatures;
- high resistance to corrosion;
- quick simple maintenance: in a few minutes we can completely remove the components of the doser without fully unscrewing the
screws, using just one spanner.
AGITATOR ELEMENT
Guarantee of continuous feeding to the dosing rollers.
The agitator has a diameter of 85 mm and
consists of 4 elements (
curved pins ). If the
agitator is running too fast, its mixing effect
can be halved, by removing the two center
pins.
The agitator can be disabled by simply
removing the drive belt.
- To disable the agitator, lift the round belt
above the edge of the drive pulley and, on
the opposite side, rotate the dosing roller
in the driving direction. The belt will come
off (Fig. 14).
- Simply leave the belt on the drive shaft
(Fig. 15).
(To fit the belt, see chapter on dosing roller)
fig. 13
fig. 14
fig. 15
B
A
D
C