Machine Specifications
5
5
OVERALL TRANSPORT WIDTH
OVERALL TRANSPORT HEIGHT
Dimensions
*
Machine Size
15ft (4.6m)
20ft (6m)
Minimum PTO HP
1
90HP
120HP
Overall Length
2
(m)
4.8
6.32
Overall Transport Width (m)
2.5
2.5
Overall Transport Height (m)
2.49
3.09
Overall Weight (kg)
3740
4400
Cut Height (mm)
18-410
18-410
Drawbar Weight (tonne)
2.5
3.0
Blade Tip Speed (ft/min)
16745
21948
Jack
3 Tonne
Deck Material
6mm Deck, Fully Welded with 8mm side plates
Gearbox
210 HP power matched driveline
PTO Shafts
Comer T80 Series to boxes, Wide Angle VP9 input
Clutch
Over run devise on input & 4 plate slip clutches on each V80 Shaft
Skids
8mm Height Adjustable sides with 100 x 12mm spring steel base.
Rotor Bar
100 x 14mm spring steel
Blades
100 x 13mm swing back blades on hardened bushes.
Tyres
Heavy duty flotation tyres 10/75-15.3 14 PLY
*all dimensions and masses are provided as a guide only if accurate dimensions are required it is recommended the specific machine be measured.
1 - Ensure Tractor Drawbar can supprot weight.
2 - Overall Length based on machine in transport position. Machine length may vary when in operation depending on cut height.
