background image

Phone (03) 9729 1422

Fax (03) 9729 1455

Sheet 4 of 4   GPN 215238

Gason Heating reserves the right to modify or alter specifications, materials, etc in the interests of product improvement.

Any enquiries contact the dealer from whom you purchased your heater.

PLEASE COMPLETE:

Dealer name:

Dealer Address:

Phone Number:

Please attach your original purchase dockets to this instruction book for future reference.

F:\Docs\Manuals\Heaters\HM215238\Duet In Wall Inst       

(through Windows NT Explorer)

Heating

Summary of Contents for Eureka Jindara Duet

Page 1: ... in the interests of product improvement Any enquiries contact the dealer from whom you purchased your heater PLEASE COMPLETE Dealer name Dealer Address Phone Number Please attach your original purchase dockets to this instruction book for future reference F Docs Manuals Heaters HM215238 Duet In Wall Inst through Windows NT Explorer Heating ...

Page 2: ...ance SAVE THESE INSTRUCTIONS Clearances to combustibles The Duet Duplicity through wall has been tested to the Australian Standard 2918 2001 Appendix B Test Report No HCMG 03 009 For this installation the flue kit could vary and should be installed to AS NZS 2918 2001 The Duet Duplicity through wall heater conforms to the Australia Standard in the following placement of the appliance in relation t...

Page 3: ... 1 1 Remove screws from the heater pedestal fascia panels 2 Position lower fascia panels Parts 2 3 as shown one on each side and end of heater 3 Reattach screws for both pedestal fascia panels Pedestal fascia panel goes on top of the lower fascia panels Lower fascia panel Lower fascia panel Panels should be flush with side of base 1 Fascia Assembly qty 2 2 Panel fascia lower left hand qty 2 3 Pane...

Page 4: ...Assembly See detail Ensure strip is flush with bottom of heater 3 Using a 3mm dia drill bit drill 4 holes through the fascia retaining strip and attach to the side of the heater 4 Using a 3mm dia drill bit drill through the other 4 holes in the retaining strip into the fascia assembly 5 Remove fascia retaining strip from heater and fascia assembly 6 Remove the fascia assembly and then re drill the...

Reviews: