DX4040 INSTRUCTION AND OPERATING MANUAL (E2.04)
Figure 21.
Measurement results (spectrum or analysis).
–
A progress bar located on top of the measurement screen informs the user of the
measuring time.
–
In spectrum measurement mode, the spectrum is displayed by default in
automatic scaling.
–
In analysis measurement mode, two displayed modes are possible: All
components displayed or single component displayed.
–
If all the components are displayed, use the stylus pen and click on the
component that you want to display in order to swap the display mode.
–
If a single component is displayed, use the stylus pen and click on the
component name in order to swap the display mode.
–
Use the stylus pen to scroll up or down the view or, alternatively, press the Fn
button first and then push up or down the arrow button on the PDA keypad
(option available with Gasmet provided PDA) (Figure 22).
Figure 22.
Scrolling the results.
–
If all components are displayed, residual alarm is notified by the component
name background displayed in red colour.
–
If a single component is displayed, residual alarm is notified by the residual
information displayed in red colour.
Scroll up or
down using the
stylus pen
57
