Gasmate TELLUS GM165-023, Instruction Manual, Page: 12 / 16

13 12
STEP 18
Offer the hose assembly up
to the connection point on the
BBQ. Tighten the connection nut
clockwise with your fingers until it
is finger tight. Using an adjustable
crescent (spanner) tighten the nut by
approximately ¼ of a full turn.
STEP 19
Attach the regulator to your gas
cylinder.
STEP 20
Turn on the gas cylinder ensuring
that all of the controls on the BBQ
are turned OFF at this point. DO NOT
ATTEMPT TO LIGHT THE BBQ!!
STEP 21
Use a solution of soapy water
(dishwashing liquid and water is fine).
Brush it on or use a spray bottle as
shown in the drawing. Ensure the
connections have a good coating.
STEP 22a
If the connection is leaking, bubbles
will start to grow in the soapy
solution. If this happens shut off the
gas supply at the cylinder.
Wait 5 minutes.
STEP 22b
Retighten the connections using an
adjustable crescent (spanner) then
repeat steps 20-21.
STEP 22c
The connection is gas tight when
no bubbles grow around the gas
connection.