Gasmate SOHO BQ1096SL, Instructions Manual, Page: 5 / 16

5 4
LIGHTING PROCEDURE
NOMINAL HOURLY GAS CONSUMPTION
Model No. Gas Type Number of Burners
Injector Size Side
Burner
Total Gas
Consumption
MJ/h
Gas Pressure kPa
BQ1096SL
Propane
4 Ø 1.02mm
54 MJ/h 2.75 kPa
MJ/h Each 13.5 MJ/h
ULPG
4 Ø 0.9mm
40 MJ/h 2.75 kPa
MJ/h Each 10 MJ/h
Natural
Gas
4 Ø 1.7mm
54 MJ/h 1.0 kPa
MJ/h Each 13.5 MJ/h
S.G.A. Pty Ltd. 33-35 Lionel Road, Mt. Waverley,
Victoria 3149, Australia.
FOR CORRECT OPERATION REFER TO INSTRUCTIONS PROVIDED.
A.G.A
Approval No.
AGA 8250 G
Burner Operation & Ignition System Check
1. Open the Lid of the barbecue before attempting to
light the burners.
2. Turn the control knobs clockwise to “OFF” position.
3. Connect the regulator to the gas bottle. Turn the gas
supply “ON” at the cylinder. Check with the use of
soapy water for any gas leakage between the bottle
and the regulator.
4. Push down a control knob and keep pressing whilst
turning anti-clockwise to the “HIGH” position (a
clicking sound is heard), this will light the burner. If
the burner does not light, repeat this process.
5. If the burner still does not light, turn the control
knob to ‘OFF’ wait 5 minutes and repeat the lighting
procedure.
6. Adjust the heat by turning the knob to the High/Low
position.
7. To turn the barbecue ‘OFF’, turn the cylinder valve
to the ‘OFF’ position and then turn all of the control
knobs on the appliance clockwise to the ‘OFF’
position.
LCC27 Regulator
& Hose
LCC27 Gas
Cylinder
(Cylinder
Not Included)
LCC27 Cylinder
Connection Device
Problem: Burner will not ignite
Possible Reason Solution
Valve on cylinder
is closed Open valve on cylinder
Control knob is off Turn knob to high when lighting
Igniter is faulty Use a long barbecue match
Burner has gone out Check that the gas bottle is not empty and re-ignite the burner