RB2
4
1
Inner # 1
Outer # 4
RB3
4
2
1
Outer # 4
Inner # 1
1st Middle # 2
RB4
4
2
1
3
Outer # 4
1st Middle # 2
Inner # 1
2nd Middle # 3
6
AERATION
To ensure the flame is clean and blue, that is NO yellow
tip to flame or sooting, adjust the primary air disk.
The primary air disk can be adjusted clockwise/counter
clockwise by hand.
The ideal positioning of the aeration disk when measured
from the venturi tube is:
RB2SL - INNER # 1 – 2mm open
- OUTER # 4 – 3mm open
RB3SL - INNER # 1 – 7mm open
- 1st MIDDLE# 2 – 7mm open
- OUTER # 4 – 3mm open
RB4SL - ALL BURNER RINGS 3mm open
Burner Operation & Ignition System Check
1. Turn inner gas valve on.
2. Open gas valve and light immediately with long
BBQ match following sequence in Step 3.
3. Light the burners in order:
Without pot:
RB2SL
RB3SL
RB4SL
Inner # 1
Inner # 1
Inner # 1
Outer # 4
1st Middle # 2
1st Middle # 2
Outer # 4
2nd Middle # 3
Outer # 4
All of these will need to be lit using a long BBQ match.
With pot:
RB2SL
RB3SL
RB4SL
Outer # 4
Outer # 4
Outer # 4
Inner # 1
1st Middle # 2
2nd Middle # 3
Inner # 1
1st Middle # 2
Inner # 1
The outer ring #4 will need to be lit using a long BBQ
match, all other rings will cross light if lit in the above
sequence.
4. Once lit adjust the primary air disk to provide a clean
blue flame.
5. Place cooking pot onto ring burner.
AFTER USE
Turn the gas cylinder valve off and wait for the flame
to go out. Then turn the appliance gas valve off.
LIGHTING PROCEDURE
Problem
Possible Reason
Solution
Burner will not ignite
Valve on gas bottle closed
Open valve on gas bottle
Control knob is closed
Turn knob onto high when lighting
Food is not cooking or
is taking too long
Burner has gone out
Check that the gas bottle is not empty
and re-ignite burner
Regulator and hose
will not fit my cylinder
Your gas cylinder is a POL style gas
cylinder connection
Swap your gas cylinder for a gas
cylinder the safer LCC27 Safe Lok
gas cylinder connection
Gas valve and burner ring matching.
RB2SL
RB3SL
RB4SL