Gasmate QUASAR 6 Manual Download Page 20

Aber Living warrants the purchaser of this product against defects in workmanship and material,  for a period of up to 
24 months from the date of purchase. The warranty is non-transferable and becomes void if  used for commercial or 
rental purposes. 
Warranty and purchase receipt of this product are to be retained as proof of purchase and must be presented if 
making a claim under the terms of the Aber Living Warranty. Repairs under warranty are free of charge, provided the 
product is delivered to our Service Department or Authorised Service Agent and freight charges both ways are paid by 
the owner. No liability will be accepted for any loss of damage in transit.
Note: In most cases the Barbecue Body only will need to be returned.
Aber Living reserves the rights to replace or repair the product within the warranty period. Warranty does not apply 
to any defect, deterioration (including corrosion if located within 1km of the sea), loss, injury or damage occasioned 
by or as a result of the misuse or abuse, negligent handling or if the product has not been installed and used in 
accordance with the instructions. The warranty is void if there is evidence of the product being tampered with by 
unauthorised persons.
If the product includes one or a number of accessories, only the defective accessory or part will be replaced, eg. hose, 
regulator, rotisserie, piezo igniter, roast hood, side burner and rail burners.
In the event of Aber Living choosing to replace the product, the warranty will expire at the original date, i.e. 24 months 
from the original purchase date.
Where this product contains information from an overseas country, nothing in that  information is intended to limit any 
condition, guarantee, right or remedy which may be  available under the Consumer Guarantees Act 1993, except to 
the extent permitted by that Act.
Fat fires are not covered under warranty

Approved for Outdoor Use Only.

For service, spare parts or product information in New Zealand, please call Aber Living  on the Customer Service Line - 
0800 161 161. www.aberliving.co.nz

2 YEAR  

LIMITED WARRANTY

YOUR PURCHASE RECORD (please complete)

Date of Purchase___________________________________________________________________

Model Number_____________________________________________________________________

Serial Number (if applicable)___________________________________________________________

Purchased from____________________________________________________________________

Summary of Contents for QUASAR 6





















Reviews: