Gasmate NOVA BQ2090 Manual Download Page 5

5

4

IMPORTANT SAFEGUARDS

READ THESE INSTRUCTIONS CAREFULLY 

BEFORE USING THE PRODUCT.  KEEP 

THE INSTRUCTIONS HANDY FOR FUTURE 

REFERENCE.

Important: Always operate the Product from a 
power source of the same Voltage, Frequency and 
Rating as indicated on the Product Identification 
Plate.

• 

DO NOT operate any product which has been 
or appears damaged in any manner or after the 
Product malfunctions, or is dropped. 

•  Always arrange the Cord so that it cannot be 

pulled or tripped over.

• 

DO NOT operate this Product immediately below 
an electrical Socket Outlet.

•  Avoid operating the Product on uneven surfaces. 

Use only on flat, level and stable surfaces. 

• 

DO NOT disconnect the Product from the Power 
Supply by pulling on the Cord.  Never move, 
carry or hang the Product by the Cord.

• 

DO NOT operate this Product in the presence of 
explosive and/or flammable liquid or fumes  
such as where aerosol (spray) Products are being 
used or where Oxygen is being administered.

•  Switch OFF and UNPLUG from Power Outlet 

when not in use, allow to cool before shifting the 
Product from one location to another, and before 
cleaning.

• 

DO NOT use the product during inclement 
weather, rain or damp conditions.

To reduce the risk of personal injury or damage 

to property, follow basic safety precautions 

when using this product, including the 

following:

• 

DO NOT use the Product for other than its intended 
use as described in these instructions.  This Product 
is intended for Normal Domestic Household Use only.  
The use of accessory attachments other than those 
recommended by the manufacturer may cause safety 
hazards.

•  The power supply must be supplied through a 

residual device (RCD) having a tripping current not 
exceeding 30mA.

•  Only connect this product to a socket-outlet having 

an earthing contact.

• 

DO NOT operate the product with a damaged cord 
or plug, or if it malfunctions, or has been damaged in 
any manner.

•  Never operate this product when your are tired, 

drinking alcohol, taking drugs or if taking medication 
that causes drowsiness.

•  This product is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision 
or instruction concerning use of the product by a 
person responsible for their safety.

•  Pets and animals must be kept away from the work 

area so as to avoid tripping dangers.

•  Never modify this Product as damage and injury may 

occur, and this will void your warranty.

•  Check for damaged parts before operating this 

Product.

•  Keep power cord away from heat, oil, solvents and 

sharp edges.

•  Check power cord for signs of damage before each 

use. If damaged do not use.

•  Power cord must only be replaced by an authorised 

service facility.

•  Use only a ‘3’ core (earth pin) extension cord with this 

Product.

NOTE: This transformer must only be used with the lights 
in your BBQ.

ELECTRICAL INFORMATION

Summary of Contents for NOVA BQ2090

























Reviews: