background image

2

3

•  Never alter or modify the regulator or gas supply 

assembly.

•  This barbecue must not be used indoors.
•  Only use in well ventilated areas.
•  CARBON MONOXIDE HAZARD - USING THIS 

APPLIANCE IN AN ENCLOSED SPACE MAY CAUSE 

DEATH. DO NOT USE IN CARAVANS, TENTS, 

MARINE CRAFT, CARS, MOBILE HOMES OR SIMILAR 

LOCATIONS.

•  This appliance shall only be used in an above 

ground open-air situation with natural ventilation, 

without stagnant areas, where gas leakage and 

products of combustion are rapidly dispersed by 

wind and natural convection.

•  Ensure the barbecue is set up on a level and stable 

surface.

•  Do not move the barbecue while in use or when hot. 

Remove the drip tray before moving. 

•  DO NOT replace the grill with an extra hotplate. 

The warranty will be voided and it violates the gas 

approval, the grill provides the ventilation needed 

for the BBQ to operate safely. It is not designed to 

be a solid hotplate device.

IF THERE IS A LEAK

•  Turn the cylinder off.
•  Ventilate the area to disperse gas.
•  Check all connections.
•  If leak persists, keep the cylinder upright. Keep 

skin away from any gas or liquid escaping from the 

cylinder.

•  Keep the cylinder at least 20 metres away from 

any sparks or ignition sources, including electrical 

equipment, camera flashes, engines and motors.

•  Disperse gas by encouraging maximum ventilation 

and spraying with a fine water spray.

IF THERE IS A FIRE

•  If the fire is at the barbecue, turn the gas off at the 

cylinder. Smother the flames with a wet cloth, fire 

blanket or extinguish using a fire extinguisher.

•  If the fire is at the cylinder, or you can not get to 

the valve to turn the gas off, contact the fire brigade 

immediately.

•  Using a garden hose, direct the water to the middle 

of the cylinder to keep it cool. Try not to extinguish 

the flame. At least if the gas is burning, it won’t be 

able to build up pressure and explode.

FOR YOUR SAFETY

Failure to comply with these instructions could result 

in a fire or explosion which could cause serious bodily 

injury, death or property damage.

CAUTION: Accessible parts may be 

very hot.

Keep young children away.
DO NOT modify this appliance.
DO NOT move this barbecue during use.
Turn off gas supply at the gas cylinder after use.
Parts sealed by the manufacturer or their agent must 

not be manipulated by the user. This barbecue is only 

to be used and stored outdoors.
•  Never operate this barbecue without a regulator.
•  Do not test for gas leaks with an open flame.
•  If this information is not followed exactly a fire 

causing death or serious injury may occur. Do 

not store a spare gas cylinder under or near this 

barbecue. This barbecue is only to be used and 

stored outdoors.

•  If there is a leak on your appliance (smell of gas) 

immediately attempt to turn off the cylinder valve. 

Remove the appliance to a well ventilated location 

away from any ignition source. Only check for leaks 

outdoors using soapy water. DO NOT try to detect 

leaks using a flame.

•  Check for leaks by brushing a soap and water 

solution over all connections. If you are unable 

to correct the leak by tightening the connections, 

turn off the gas and contact customer service 

immediately.

•  Only use the hose assembly as supplied with this 

appliance for connection to the cylinder - DO NOT 

USE ADAPTORS.

•  After use turn the gas cylinder valve off, wait for 

the flame to go out, then turn the appliance control 

valve off.

•  Avoid twisting or kinking the flexible hose.
•  Do not store or use petrol or other flammable 

liquids in the vicinity of this or any other appliance.

•  Do not store empty or full spare gas cylinders under 

or near this or any other appliance.

•  Never test for gas leaks with a lit match or open 

flame. Never light barbecue with hood closed or 

before checking to ensure the burner tubes are fully 

seated over gas valve orifices.

•  Never lean over cooking surface when lighting.

GENERAL INFORMATION

Summary of Contents for GM174-045

























Reviews: