Gasmate GM152-029, Instructions Manual

Page: 8 / 12

8 9
ASSEMBLY INSTRUCTIONS
Step 6
Attach the regulator to your gas
cylinder.
Step 7
Turn on the gas cylinder ensuring
that all of the controls on the BBQ are
turned OFF at this point. DO NOT
ATTEMPT TO LIGHT THE BBQ!!.
Step 8
Use a solution of soapy water
(dishwashing liquid and water is fine).
Brush it on or use a spray bottle as
shown in the drawing. Ensure the
connections have a good coating.
Step 9a
If the connection is leaking, bubbles
will start to grow in the soapy
solution. If this happens shut off the
gas supply at the cylinder.
Step 9b
Retighten the connections using an
adjustable crescent (spanner) then
repeat steps 7-8.
Step 9c
The connection is gas tight when no
bubbles grow around the gas
connection.
Step 5
Offer the hose assembly up to the
connection point on the BBQ. Tighten
the connection nut clockwise with
your fingers until it is finger tight.
Using an adjustable crescent
(spanner) tighten the nut by
approximately ¼ of a full turn.