Gasmate G2727 Instructions Manual Download Page 2

        

If this information is not followed exactly a fire 

causing death or serious injury may occur.  Do 
not store a spare gas cylinder under or near this 

barbecue.  Never fill the cylinder beyond 80% 

full.  This barbecue is only to be used and stored 
outdoors.

GENERAL INFORMATION

Gas Installation Codes

•    Barbecues must be used in accordance with the 

installation requirements of your gas supply authority, 
or the appropriate installation code issued by Standards 
Australia AS 5601.

•    Barbecues for use with bottled gas are labelled 

‘propane gas’.

Clearances

Minimum Clearances from combustible materials must be: 
Rear - 600mm      Sides - 600mm      Above - 600mm

Hose & Regulator Safety

The regulator and hose assembly supplied with the 
barbecue are suitable for propane gas only.  
The pressure regulator and hose assembly supplied 
with the barbecue must be used. Replacement pressure 

regulators and hose assemblies must be those specified by 

the barbecue manufacturer.

When connecting the hose and regulator assembly to the 
gas cylinder, take care to avoid unnecessary twisting of the

flexible hose. Maximum hose length is 1 metre.

After the assembly has been secured, turn on the gas and
check for leaks by brushing a soap and water solution over
all connections.  

If you are unable to correct the leak by tightening the
connections, turn off the gas and contact the supplier
immediately.
A

lways ensure the barbecue is kept away from flammable

materials and the gas cylinder clear of any heat source.
When changing over from an empty gas cylinder to a full 

one make sure this procedure is carried out in a flame free

atmosphere.

Specifications

Barbecue specifications can be found on the data label 
attached to the rear panel of the barbecue body.

Gas Cylinder Use & Safety

This is a low pressure barbecue and must only be used with 
the hose and regulator supplied. This appliance shall only be 
used with propane gas cylinders certified to AS 2469. It may 
be hazardous to attempt to fit other types of gas containers.

The gas cylinder should be filled by a reputable gas supplier 
and visually inspected and re-qualified at each filling.

Always keep cylinder in an upright position. Always close 
the cylinder valve when the barbecue is not in use.
Do not subject gas cylinder to excessive heat.

Never Store your Gas Cylinder Indoors.

If you store your barbecue indoors, ALWAYS disconnect the

gas cylinder first and store the cylinder safely outside.

Cylinders must be stored outdoors in a well ventilated area
out of reach of children, and must not be stored in a 
building, garage or any other enclosed area.

       

 IMPORTANT 

Read these instructions for use carefully. 

Familiarise yourself with the appliance before 

connecting it to its’ gas container. Keep these 

instructions for future reference.

 

Failure to comply with these instructions could result in a  

 

fire or explosion which could cause serious bodily injury,  

 

death or property damage. 

       Accessible parts may be very hot.
       Keep young children away.
        An

y modifications of this barbecue may be

       dangerous.
       Do not move this barbecue during use.
         Turn off gas supply at the gas cylinder after use.
       Read instructions before using the barbecue.
         Parts sealed by the manufacturer or their agent     

must not be manipulated by the user. This barbecue 
is only to be used and stored outdoors.

       

 

Never operate this barbecue without a regulator

       

 

Do not test for gas leaks with an open flame

          

If you smell gas:

 

         1.  Shut off gas to the barbecue at its source,
           if possible.

       2. Extinguish any open flame.

       3. Open hood.
       4. If odour continues immediately call your

           gas supplier or fire department.

       

     Never connect an unregulated gas cylinder to your     

barbecue.

2

Summary of Contents for G2727









Reviews: