Gasmate FLUX GM124-025, Instructions Manual

Page: 5 / 12

5 4
ASSEMBLY INSTRUCTIONS
Note: Remove any transit
protection material.
Tools required
Phillips head screw driver and 2
adjustable spanners.
STEP 1
The lower support leg (4) is
identified by a rubber foot at the
bottom. Remove the five screws
(15) from each leg, using them to
attach the bottom panel (3) and
middle plate (1) from the inside.
Ensure the magnets on the side of
the middle plate are aligned with
the ‘T’ shaped holes on the side of
the bottom panel.
STEP 3
Remove the fasteners from the
wheels. Lay the frame down and
attach the wheels (19) into the
pre-drilled holes at the back of the
bottom panel (3) with the fasteners
removed from them.
STEP 2
Remove the screws (15) from each
of the upper support posts (5),
using them to attach to the middle
plate (1) from the inside. (Fig. 1)
Remove the screws from the
radiant head (9/6), using them to
attach it to the upper posts (5)
from the outside.
H
AA
J
1
15
3
4
15
5
6
9
15
15
1
H
AA
J
1
15
3
4
15
5
6
9
15
15
1
Fig. 1