manualshive.com logo in svg

Gasmate CORVUS GM172-151, Manual

Share
Download
Gasmate CORVUS GM172-151 Manual Download Page 4

4

GENERAL INFORMATION

Location of your Barbecue

DO NOT use your barbecue in garages, porches, 
breezeways, sheds or other enclosed areas. Your 
barbecue is to be used OUTDOORS. The barbecue is 
not intended to be installed in or on recreational vehicles 
and/or boats and should not be placed under any surface 
that will bur

n. Do not obstruct the flow of combustion 

and ventilation air around the barbecue housing.

Protect Children

Keep children away fr

om barbecue during use and until 

barbecue has cooled after you have finished. Do not 

allow children to operate barbecue.
Always ensure that no sporting or physical activities are 
carried out in close pr

oximity to the barbecue during use 

and while still hot.

General Assembly

Remove the barbecue and components f

r

om the packing 

carton. Check against parts list and lay components out 

within easy reach. Do not throw the carton away, unfold 

flat and use as a p

r

otective work surface. Contact your 

supplier for r

eplacement parts if necessar

y.

Tools You Will Need

Standard Phillips-head screw driver (or cordless drill 
and bits) and Adjustable spanner (open ended shifter) or 
spanners.

Check Barbecue for any Damage

Befor

e attempting to assemble your barbecue, it is 

advisable to check that all the necessary parts have been 

included using the list on page 6. Inspect barbecue parts 
as you proceed. Contact your supplier for assistance 
regarding r

eplacement of any damaged or missing parts. 

Do not assemble or operate a barbecue that appears 
damaged. Barbecues for use with gas cylinders a

re 

labelled ‘LPG’. Check labelling at gas connection on your 

barbecue.

ASSEMBLY INSTRUCTIONS

Befor

e assembling the barbecue, 

read these Instructions 

carefully.

Assemble the barbecue on a flat, clean surface.

The barbecue is heavy.

NOTE:

 Do not fully tighten all the nuts during the initial 

stages of assembl

y.

Caution:

 Sheet metal can cause injur

y. Wear gloves 

when assembling the barbecue.

Nominal Hourly Gas Consumption

Gas Type

Number of

 

BBQ Burners

Injector Size 

Ring Burner

Injector Size 
BBQ Burner

Injector Size 

Side Burner

Total Gas 

Consumption

 

MJ/h

Gas 

Pressure 

kPa

I3B/ 

P30/ 

ULPG

4

Ø

 1.07mm

Ø

 0.90mm

Ø

 0.91mm

65.9MJ/h

2.75 kPa

MJ/h each

18MJ/h

12.2MJ/h

11.2MJ/h

Summary of Contents for CORVUS GM172-151





























Reviews:

No comments

Brands by name

Popular brands

Load more brands