OPERATION - TROUBLE SHOOTING
Problem
Possible Causes
Solution
Appliance does not work
Battery flat - 3 Tile
Replace
D size battery
Tilt switch activated
Place on level ground and in area it
can’t be knocked over. Turn off and
restart.
ODS activated
Ensure appliance is in an open area
andnot subject to a strong direct
breeze. Turn off and restart.
Burner will not light
Air in gas line
Purge gas line
Low gas pressure
Install full cylinder
Gas turned OFF
Turn gas ON
Tilt switch activated
Place on level ground and in area it
can’t be knocked over. Turn off and
restart.
ODS activated
Ensure appliance is in an open area
andnot subject to a strong direct
breeze. Turn off and restart.
Burner will not stay lit
Suspect thermocouple
Repair or replace
Suspect valve
Repair or replace
Wind exceeding 15kph
Shelter from wind
ODS activated
Ensure appliance is in an open area
andnot subject to a strong direct
breeze. Turn off and restart.
NOTE: If the appliance cannot be adjusted to perform correctly it should not be used until serviced or repaired.
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property
damage. Any modifications or adjustments made to product without prior authority from the manufacturer willvoid
any warranty claims. Read the set up and operating instructions thoroughly before installing or servicingthis
equipment.