Gasmate BQ8243 Instructions For Use Manual Download Page 2

3

2

Gas Installation Codes

•  Barbecues must be used in accordance with the 
  installation requirements of your gas supply  
  authority, or the Australian Standard AS 5601.
•  Barbecues for use with bottled gas are labelled  
  ‘propane gas’.
•  Barbecues for use with natural gas are labelled  
  ‘natural gas’ and must be installed by an  
  authorised person. Check the gas type sticker  
  attached to the barbecue.

Clearances

Minimum Clearances from combustible materials 
must be: 
Rear - 600mm & Sides - 600mm

Hose & Regulator Safety

The regulator and hose assembly supplied with 
the barbecue are suitable for propane gas only. A 
gas regulator adjusted to have an outlet pressure 
of 2.75kPA is supplied for connection to the 
propane gas cylinder. The pressure regulator and 
hose assembly supplied with the barbecue must 
be used. Replacement pressure regulators and 

hose assemblies must be those specified by the 

barbecue manufacturer. 
When connecting the hose and regulator assembly 
to the gas cylinder, take care to avoid unnecessary 

twisting or kinking of the flexible hose.

After the assembly has been secured, turn on the 
gas and check for leaks by brushing a soap and 
water solution over all connections.
If you are unable to correct the leak by tightening 
the connections, turn off the gas and contact the 
supplier immediately.
Always ensure the barbecue is kept away from 

flammable materials and the gas cylinder clear 

of any heat source. When changing over from 
an empty gas cylinder to a full one make sure 

this procedure is carried out in a flame free 

atmosphere.

Specifications

Barbecue specifications can be found on the 

 

data label attached to the door panel or the 
barbecue body. Hose connection thread at gas 
inlet is 1/4” - BSP.

Gas Cylinder Use & Safety

This is a low pressure barbecue and must only be 
used with the hose and regulator supplied. Your 
barbecue is designed for use with 9Kg propane 

gas cylinders certified to AS 2469.
The cylinder should be filled by a reputable gas 
supplier and visually inspected and re-qualified at 
each filling.

GENERAL INFORMATION

CONTENTS

Section

Page

General information

2

General assembly

5

Lighting procedure

5

Operating procedure

6

Care and maintenance

7

Exploded diagram and parts list

 

BQ8243 
BQ8262 

8-9  

10-11 

Assembly instructions  

12-17

Natural gas conversion

18

Safe locations

19

Notes

20

Summary of Contents for BQ8243





















Reviews: