Gasmate BQ1070 Instructions For Use Manual Download Page 4

5

4

 

FOR YOUR SAFETY

Failure to comply with these instructions could 
result in a fire or explosion which could cause 
serious bodily injury, death or property damage. 

CAUTION: Accessible parts may be very 

hot.

Keep young children away.
Any modifications of this barbecue may be 
dangerous.
DO NOT move this barbecue during use.
Turn off gas supply at the gas cylinder after use.
Parts sealed by the manufacturer or their agent 
must not be manipulated by the user. This barbecue 
is only to be used and stored outdoors.
•  Never operate this barbecue without a regulator.
•  Do not test for gas leaks with an open flame.
•  If this information is not followed exactly a fire 

causing death or serious injury may occur. Do not 
store a spare gas cylinder under or near this  
barbecue. This barbecue is only to be used and 
stored outdoors.

•  If there is a leak on your appliance (smell of 

gas) immediately attempt to turn off the cylinder 
valve. Remove the appliance to a well ventilated 
location away from any ignition source. Only 
check for leaks outdoors using soapy water. DO 
NOT try to detect leaks using a flame.

•  Check for leaks by brushing a soap and water 

solution over all connections. If you are unable to 
correct the leak by tightening the connections, 
turn off the gas and contact customer service 
immediately 

•  DO NOT replace the grill with an extra hotplate. 

The warranty will be voided and it violates the gas 
approval, the grill provides the ventilation needed 
for the BBQ to operate safely. It is not designed 
to be a solid hotplate device.

•  Do not store or use petrol or other flammable  
  liquids in the vicinity of this or any other    
 appliance. 
•  Do not store empty or full spare gas cylinders 

under or near this or any other appliance.  

•  Keep the gas hose away from hot surfaces and 

protect from dripping grease. Avoid unnecessary 
twisting of hose. Visually inspect the hose prior 
to each use for cracks, excessive wear or other 
damage. Replace the hose if necessary.

GENERAL INFORMATION

•   Never test for gas leaks with a lit match or open 

flame. Never light barbecue with hood closed or 
before checking to ensure the burner tubes are 
fully seated over gas valve orifices.  

•  Never lean over cooking surface when lighting.  
•   Never alter or modify the regulator or gas supply 

assembly. 

•  This barbecue must not be used indoors.
•    Only use in well ventilated areas.  
•  CARBON MONOXIDE HAZARD - USING THIS  

APPLIANCE IN AN ENCLOSED SPACE MAY  
CAUSE DEATH. DO NOT USE IN CARAVANS,  
TENTS, MARINE CRAFT, CARS, MOBILE    
HOMES OR SIMILAR LOCATIONS. 

•  This appliance shall only be used in an above 

ground open-air situation with natural ventilation, 
without stagnant areas, where gas leakage and 
products of combustion are rapidly dispersed by 
wind and natural convection.

•  Ensure the barbecue is set up on a level and 

stable surface.

•  Do not move the barbecue while in use or when 

hot. Remove the drip tray before moving.

IF THERE IS A LEAK

•  Turn the cylinder off.
•  Ventilate the area to disperse gas.
•  Check all connections.
•  If leak persists, keep the cylinder upright. Keep 

skin away from any gas or liquid escaping from 
the cylinder.

•  Keep the cylinder at least 20 metres away from 

any sparks or ignition sources, including electrical 
equipment, camera flashes, engines and motors.

•  Disperse gas by encouraging maximum 

ventilation and spraying with a fine water spray.

IF THERE IS A FIRE

•  If the fire is at the barbecue, turn the gas off at 

the cylinder. Smother the flames with a wet cloth, 
fire blanket or extinguish using a fire extinguisher.

•  If the fire is at the cylinder, or you can not get 

to the valve to turn the gas off, contact the fire 
brigade immediately.

•  Using a garden hose, direct the water to the 

middle of the cylinder to keep it cool. Try not to 
extinguish the flame. At least if the gas is burning, 
it won’t be able to build up pressure and explode.

Summary of Contents for BQ1070





















Reviews: