(844) 538-7890
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
8
Using Your Induction Cooktop
To start cooking
1. Touch the control, after power on, the buzzer beeps once, all displays
show or , indicating that the induction cooktop has entered the
state of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
3. Touch the heating zone selection control, the indicator next to the key will flash.
4. Select a heat setting by touching and sliding along the dotted line towards right.
• If you don’t choose a heat setting within 1 minute, the induction cooktop will automatically
switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating will take place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed on it.
Summary of Contents for IH30BFH
Page 1: ......
