-16-
9. TROUBLESHOOTING
The table below lists the problems that might occur with the machine, their potential causes and how
to solve them.
Problem
Cause
Solution
The machine does not start
Machine unplugged
See manual “6.2. Start-up”, point 3
The safety elements have not
been fitted
Fit safety elements
The machine still does not start
Safety sensors have come lose. Calibrate security sensors
Electrical connections or
components in poor condition
See manual “8. Maintenance”,
point 4
The patties do not come out well
formed (too little or too much
mixture)
Too little or too much mixture
See manual “6.2. Start-up”, point 7
The patty deforms with the
extractor slice.
The mixture is not correct.
The mixture should be smoother
or colder.
Incorrect use of the slice
See manual “6.2. Start-up”, point 8
Slice thread in poor condition
Change thread