General Installation
Terminal Block ID
Page 22
MDE-4319A TopKAT Fuel Managment System Installation Manual · November 2005
Terminal Block ID
All communication wiring to the TopKAT is terminated to green wiring connectors on the
communication board or the electronic housing assembly.
To gain access to the inside of the TopKAT, unlock the rear door and open it all the way.
Unscrew the two captive screws holding the hood in place. Slide the hood toward the rear of
the unit (about 1 inch) and lift straight up.
The left side of the electronic housing assembly is shown in
Figure 3-3: Electronic Housing Assembly - Left Side
