MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Page 53
5.4 Installing Options
Installation
2
Remove the screws affixing the panel covering the printer opening to the Islander Prime pole
door.
3
Place the printer into the opening from the outside.
4
Use the screws provided to secure the printer to the inside of the Islander Prime in the
provided bracket as follows (see
Figure 40: Panel Printer in Islander Prime Pole
5
Connect the printer ground cable to the ground stud in the Islander Prime pole door together
with the main grounding cable as follows (see
):
Figure 41: Reconnect Grounding Cable