Gasboy Islander PLUS, Installation Manual

Page: 89 / 146

3-9.3. Current Loop Electronic Pump
The wiring for the Current Loop electronic pump is provided as follows:
•
Figure 3-25 shows the specific wiring connections between OrIC and the Current
Loop pump nozzle, and the terminals that differ from the Mechanical Pump. The
figure shows the serial connection between two Current Loop pumps and the
Terminal Block.
•
Figure 3-23 shows the wiring list for connection to the Terminal, as published in the
Wiring Label added to the inner door. The Wiring Label follows the physical
location of the wires in the Terminal Block, as shown in Figure 3-14.
Figure 3-25 Current Loop Electronic Pump - Wiring Diagram
NOTE
Recommended maximum distance is 2600'.
Islander PLUS Manual
75