Gasboy Islander ICR PLUS, Installation Manual

Page: 30 / 146

1-5. AVAILABLE CONFIGURATIONS
1-5.1. General
Islander PLUS is available in several configurations, in accordance with its intended use and with
the components installed. All configurations are manufactured in accordance with specific
customer request and receive a Part Number.
The following paragraphs describe the several configurations, and their devices composition.
1-5.2. Islander PLUS / ICR PLUS
Islander PLUS is supplied with the OrCU (Orpak Controller Unit) embedded in the unit. In this
configuration, Islander PLUS performs as full station controller, providing functions such as
authorization unit, central forecourt devices controller, linked to the Head Office, etc.
In ICR PLUS configuration, the OrCU is removed from the pedestal. The ICR PLUS operates as an
authorization terminal in order to ease the use of the system in large home base stations. ICR PLUS
is linked to another Islander PLUS or CFN PLUS in order to connect to the Head Office. In this
configuration, the OrCU in the Islander PLUS pedestal is shared by both units.
1-5.3. Printer Option
The printer in the Islander PLUS /ICR PLUS is provided as an option. The printer issues a printout
of the transaction to the driver.
1-5.4. Vehicle Identification System
Some options are available for vehicle identification in the Islander PLUS /ICR PLUS:
•
FuelPoint PLUS - WGT (Wireless Gateway Terminal) is Vehicle identification process
performed in a wireless mode. WGT can be installed on top of the Islander PLUS pedestal
or in an external outdoor unit (P/N PA04000001). WGT receives DataPass or FuelOpass
signals, decrypts their information and transmits it to the Station automation system (OrCU)
in a secure manner over an RF signal. This setup enables the RF signal to travel through
various routes and bypass possible interferences (such as a big truck/bus). The transmission
signal range is 10 meters. The WGT is designed to be installed in a designated external box
on the station wall or in a pedestal. The WGT should be connected to the OrCU box using
CAT5E cable.
More than one WGT outdoor unit can be mounted in one station to ensure improved RF area
coverage. In this case one WGT box is Master and the other(s) are routers. For further
details, refer to WGT outdoor unit Installation Guide, document no. MDE-4815.
•
No vehicle identification unit: The vehicle identification process will be done
manually by the driver with any accepted authorization devices such as cards, tags or
manual entry.
1-5.5. Dispensers
Islander PLUS can support either mechanical or electronic dispensers, in accordance with its
configuration.
Islander PLUS Manual
16